TL260
Maintenance
06_Maintenance_en.fm - V 0.1 - 14.4.11
71 / 187
6
11
Refilling with coolant
Fig. 6-11 Topping up the combined cooler
Park the machine in horizontal position.
Carefully unscrew the filler cap (1), until all pressure has been relieved from
the combined cooler.
If required, top up the coolant. When the engine has cooled down, the surge
tank must be half full.
If necessary top up the coolant with a 50/50% mixture of water and
antifreeze. See chapter 6.4.2 "Consumables", page 52.
Screw the cover (1) back onto the combined cooler.
Checking antifreeze
Check the antifreeze setting before the beginning of the cold season.
At the factory, the antifreeze protection is set to approx. -25°C. Adjust the
antifreeze properties for lower temperatures, if required.
L260-711L260-711
1
4560_6010
To Next Page
Loading...
