TL260
Maintenance
06_Maintenance_en.fm - V 0.1 - 14.4.11
75 / 187
6
11
Cleaning cooling fins in case of strong exposure to dust
Fig. 6-14 Cleaning the combined cooler
Clean the combined cooler by blowing it out with compressed air from the air
discharge side.
If necessary, e. g. in case of an oil contaminated combined cooler, clean the
combined cooler with cold cleansing agent or steam cleaning equipment. For
this work park the machine on a washing area equipped with an oil separator.
After cleaning, run the engine until it reaches operating temperature to dry the
combined cooler.
4560_6014
1
To Next Page
Loading...
