6 Using the product
117
Designation Explanation
Status Date and time, when the alarm was
triggered.
Comments
Any comments on the alarm.
Tel. number/name Telephone number or recipient for the
alarm message
> If needed, enter Comments on an alarm in the column of the
same name.
Pos: 151 /TD/Produ kt verwenden/testo Sa veris/06c Alarme ana lysieren/02 Alarm quit tieren @ 0\mod_11890794363 28_79.docx @ 3973 @ 3 @ 1
6.6.2. Acknowledge the alarm
If you acknowledge an alarm at the Saveris base, this is
carried over into the software.
If you have received an alarm message by SMS, you
can acknowledge the alarm by sending the received
SMS with the same text back to the mobile number of
the Saveris base.
> Switch to the Acknowledgement tab in the calendar and
acknowledgement section.
- The list of the registered channels is shown.
Designation Explanation
Source
Designation of the individual channels of
the registered probes.
The channel delivers measurement
data within the limit values.
A limit value has been breached
and the Saveris base has triggered an
alarm.
Time Date and time, when the alarm was
triggered.
To Next Page
Loading...
Need help?
General
