5 First steps
48
8. Place housing cover on the router.
9. Screw on housing cover .
10. Insert protection caps .
The wall mounting of a router is performed in the same
ways as for a probe; see "Mounting the probe on the
wall".
Pos: 66 /TD/Erst e Schritte/testo Saver is/Hardware erwei tern/01 a Router einbinden/ 02 Router anmelden @ 1\mod _1197548238578_79.d ocx @ 6274 @ 4 @ 1
5.11.1.3. Connecting router
You can connect a maximum of 30 routers to the
Saveris base.
The Saveris base can communicate directly with a
maximum of 15 routers.