6 Using the product
96
• Alarms indicate a one-off, but possibly also regular, malfunction.
The aim must be to minimise the number of alarms that occur
during operation and eliminate such alarms wherever possible.
Several hundred unacknowledged alarms not only make
troubleshooting in serious cases more difficult, but also slow the
system response during operation.
Pos: 126 /TD/Produ kt verwenden/testo Sa veris/04 Alarme konf igurieren/01 Alarm vor konfigurieren @ 0\ mod_1188997882750_79. docx @ 3781 @ 3 @ 1
6.4.1. Basic settings for the SMS messages
The Basic settings submenu is only shown if the
Saveris base is equipped with a GSM module.
1. Click on Alarm settings in the navigation area.
- In the data window, the Basic setting and Alarm overview
submenus as well as the probes connected in the Saveris base
are shown.
2. Click on Basic setting.
- The basic settings for the alarm messages via SMS are shown
in the display range.
If no recipient was defined with clear text beforehand, the
telephone number is used alternatively as the recipient
name.
Designation Description
Receiver 1 Telephone number of the employee who
is to receive the alarm message. Enter
with country code, network or area code
and local number: 00491721234567.
To Next Page
Loading...
Need help?
General
