TESTO Saveris T1E Ethernet probe User Manual

6 Using the product
99
Alarm output
Saveris Base
Relay
Audible signal
Light signal
Advanced settings Radio interference (stationary) [min]
Network interference [min]
Radio interference (mobile) [h]
Apply settings
Saves the alarm settings.
Activate/deactivate
all
Activates all available alarm settings.
3. Carry out alarm settings for the base.
4. Click on Apply Entries.
5. Exit Alarm Management menu.
- Alarm settings are transferred to the devices.
Pos: 128 /TD/Produkt verwenden/testo Saveri s/04 Alarme konfiguri eren/SBE/01 Alarm vorkonfi gurieren - 01 Gruppen SBE @ 15\mod_ 1381828452982_79.d ocx @ 178253 @ 34555554555 55 @ 1
6.4.3. Setting up alarm groups
6.4.3.1. Components
Any configuration changes are only transferred to the
probe/base once you have exited the Alarm management
menu!
You should therefore exit the Alarm management menu
after editing.
1. Click on Alarm management in the navigation area.
- The data area shows the sub-menus Base alarm settings,
Component alarm settings, Channel alarm settings.
2. Click on Component alarm settings.
- The probe alarm settings are shown in the display area.

TESTO Saveris T1E Ethernet probe Specifications

General

Brand	TESTO
Model	Saveris T1E Ethernet probe
Category	Measuring Instruments
Language	English