6 Using the product
97
Designation Description
To acknowledge an alarm
message, send the received
message with the same text back
to the mobile number of the
Saveris base.
Receiver 2 Checkbox and input field for the
telephone number of the employee who is
to receive the alarm message if Receiver
1 cannot be reached. Enter with country
code, network or area code and local
number: 00491721234567.
To acknowledge an alarm
message, send the received
message with the same text back
to the mobile number of the
Saveris base.
Forward after ...
min
If Receiver 1 does not react within this
time span, the message is forwarded to
Receiver 2.
Additional text Additional text that is attached to the
alarm message.
The system alarms are above all used for pointing out
irregularities in the measurement system. If no reaction
follows the system alarms, uninterrupted data recording
is not guaranteed.
If a system alarm is issued via SMS or e-mail time
delays may occur.
The notification function via SMS is only available if the
Saveris base is equipped with a GSM module.
3. Perform the required settings.
When exiting the basic settings the settings are saved.
Pos: 127 /TD/Produkt verwenden/testo Saveri s/04 Alarme konfiguri eren/SBE/01 Alarm vorkonfi gurieren - 00 Alarme der Base ei nrichten SBE @ 12\mod_13385331 78190_79.docx @ 126729 @ 3 @ 1
To Next Page
Loading...
Need help?
General
