TESTO Saveris T1E Ethernet probe User Manual

7 Maintaining the product
152
1 Select the destination directory to which you saved the
downloaded folder.
2 Confirm with OK.
- The information The process has been completed
successfully is displayed after approx. 1 min.
3. Confirm with OK.
- The Saveris startup wizard is closed automatically.
- The firmware update for the Saveris base is imported.
- The update process is completed as soon as the base starts up
again and appears in the Select language.
4 Select the language on the base and confirm with ENTER or
5. Wait approx. 10 minutes until the Saveris base starts
automatically.
- The Saveris base firmware has been updated.
- The update process for all other Saveris components in the
system begins.
After the system update, the new firmware version is shown
for each component in the Saveris software under the
System menu item. The firmware version is only updated
when the software is restarted.
Pos: 181 /TD/--- Seitenwechsel --- @ 0\mod_1173774430601_ 0.docx @ 283 @ @ 1

TESTO Saveris T1E Ethernet probe Specifications

General

Brand	TESTO
Model	Saveris T1E Ethernet probe
Category	Measuring Instruments
Language	English