TESTO Saveris Instruction Manual

7 Using the product
48
2
In the tree structure of the data area, open the group that contains the
data to be displayed.

The data for the selected data is displayed.
2.1
If necessary, deactivate channels via the checkboxes for the
display.
You can show or hide the gridlines for the corresponding axis by
clicking on the time axis or the value axis.
Zooming in
Zoom in on a detail of the diagram, for example to check the behaviour of the
readings within a specific time span.
1
Click on Edit | Tools | Zoom in.
2
In the diagram, press and hold the left mouse button to highlight the
area that needs to be enlarged.
If you click on [Original size], the whole diagram is shown again.
Information on a reading (crosshairs)
If you move the crosshairs along a curve, you will quickly get detailed
information on the individual readings.
1
Click on Edit | Tools | Crosshairs.
2
In the diagram, click on the point for which the details need to be
shown.

A dialogue is displayed with the following information about the
reading:
• date on which the reading was recorded,
• time at which the reading was recorded,
• number of the reading and
• reading.
You can move along the curve with the left mouse button pressed and
held enabling you to see the detailed information for the readings.
To do this, it is not necessary to follow the course of the curve exactly;
the crosshairs do this automatically when you move the mouse to the
right or left.

TESTO Saveris Specifications

General

Humidity Range	0 to 100 %RH
Measurement Parameters	Temperature, Humidity
Data Transmission	Wireless
Alarm Function	Yes
Resolution	0.1 °C, 0.1 %RH
Radio Frequency	868 MHz, 915 MHz
Data Storage	Internal memory, Cloud
Power Supply	Battery