7 Using the product
54
Name Explanation
Applies the settings until other data
are called up. The dialogue is closed.
Closes the dialogue without applying
any changes at all.
Shows a freely-definable extract of the
Automatic scaling... Shows the entire diagram in the
Shows a firmly defined extract that
can be moved over the time axis.
Limits from…to (when Position
view is enabled)
Limits for the Position view.
Minimum time cycle (when Extract
view is enabled)
Specification of which time period
should at least be shown.
Selection list for the unit
(when
Extract view is enabled)
Unit of the time axis in the minimum
time cycle:
sec (second)
min (minute)
h (hour)
All times are the real times at which
the readings were recorded.
Sets the starting time to 00:00; the
time then runs relative to this starting
The function associated with this is
not available in the Small Business
Specification that the program should
perform the division of the axis.
Division manual Specification that the division of the
axis should be performed manually.
Grid [<], [>] (when automatic division
By clicking on [<] or [>]
, make the axis
division larger or smaller.
Interval (when manual division is
enabled)
Manual entry of the grid.
Selection list for the unit (when
manual division is enabled)
sec (second)
min (minute)
h (hour)