11 POWER SUPPLY AND RECHARGE
The device is powered by an internal rechargeable lithium-ion battery.
The charge is provided by the IPC 30 charger.
1.
Red LED
2.
Green LED
3.
Plug connector
4.
Plug *
5.
Power supply jack
(*) Europlug in the image as an example.
Only use the appropriate plug for the type of outlets in your workshop.
The charger has two LEDs that show the charging status:
LED STATUS MEANING
Green
OFF Not connected to the device.
blinking
Connected to the device.
Charge in progress.
steady ON Charge complete.
Red blinking Error.
The device can be disconnected from the mains by means of the external charger's plug.
Make sure the device's power plug can always be accessed so that it is
possible to disconnect it from the mains at any time.
77
en
To Next Page
Loading...
