13 COMMUNICATION
The Wi-Fi module installed in the device makes it able to:
•
connect to the Internet, to receive updates for the installed software;
•
be used through the display units.
The Bluetooth module installed in the device makes it able to:
•
connect and interact with the VCIs, to complement the photometric analysis.
The configuration of the communication takes place through specific software functions.
To be able to use the diagnostic functions:
1.
the specific HASP key must be connected to one of the two USB connectors on the
device;
2.
the diagnostic software activation procedure must have been carried out.
81
en
To Next Page
Loading...
