13.2 Bluetooth
The device uses the Bluetooth connection to connect to a diagnostic tool and thus make the
most of the diagnostic potentials offered by the connection to the vehicle control unit.
The configuration of the communication takes place through specific software functions.
Proceed as follows:
1.
Connect the VCI to the vehicle's OBD socket.
2.
Turn the vehicle's ignition key on ON (instrument panel on).
3.
Turn on the device.
4.
Access the software functions for the configuration of the communication with the VCI.
5.
Follow the indications that appear on-screen to complete the configuration.
For further information see the VCI's technical manual and the software's operating manual.
83
en
To Next Page
Loading...
