THERMACUT EX-TRAFIRE 105HD - LCD Description; Input Plug Unplugging Notice; Output Current Switching Notice

26
7 Operation of the power supply EX-TRAFIRE
®
105HD
7.1 LCD description
NOTICE
Material damage caused by unplugging the input power plug
during operation
If the input power plug is unplugged during operation, the
EX-TRAFIRE
®
105HD may be irreparably damaged.
 Do not unplug the input power plug during operation and ensure a
constant power supply.
NOTICE
Material damage due to switching the output current strength
during operation
If the output current strength is switched during operation, the
power supply may be damaged.
 Set the output current strength before starting operation and do not
switch it during the cutting process.
Fig. 9 LCD description
A Cutting voltage
B Output arc current
C Torch type
D Grid cutting
E Gouging/Marking
F Cutting
G Status
H All cutting parameters
set
I Air pressure
J Transfer signal
K Indicates activation of
the torch trigger or
pins 3, 4 in the CNC
connection.
A
B
C
DEFGI
J
K
H