EasyManua.ls Logo

THERMACUT EX-TRAFIRE 105HD - Product and Electrical Safety

THERMACUT EX-TRAFIRE 105HD
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
2Safety EX-TRAFIRE
®
105HD
2.3 Warning and notice signs
The following warning, notice, and mandatory signs can be found on top
of the product:
These markings must always be legible. They should not be covered,
obscured, painted over, or removed.
2.4 Product-specific safety instructions
Do not use or store the power supply in wet conditions or
environments.
Do not operate the power supply when the housing is open.
2.5 Safety instructions for the electrical power supply
Ensure that the input power cable is not damaged, for example, by
being driven over, crushed, or torn.
Check the input power cable for damage and wear at regular intervals.
If it is necessary to replace the input power cable, only cables specified
in Table 9 Recommended cable extensions on page 19 must be used.
Only a certified electrician or trained personnel should carry out work
on the input power cable and the input power plug.
Water protection and mechanical stability must be ensured when
replacing the input power plug of the input power cable.

Table of Contents

Related product manuals