EX-TRAFIRE
®
105HD 1 Identification
5
1 Identification
The EX-TRAFIRE
®
105HD is a portable plasma arc cutting power supply for
mechanized and manual plasma cutting, gouging, and optional marking. It
uses compressed air or nitrogen to cut almost all electrically conductive
materials. The EX-TRAFIRE
®
105HD has to be operated only with original
Thermacut
®
consumables and maintenance parts.
This documentation describes the EX-TRAFIRE
®
105HD cutting power
supply.
1.1 Labeling
This product fulfills the requirements that apply to the market to which it
has been introduced. Corresponding labels have been affixed to the
product, if required.
1.2 Identification plate
The EX-TRAFIRE
®
105HD is labeled by means of an identification plate on
the housing located on the side and bottom of the machine.
For inquiries, please have on hand the order and serial number of the
power supply as seen on the identification plate.
Fig. 1 EX-TRAFIRE
®
105HD identification plate
To Next Page
Loading...
