THERMACUT EX-TRAFIRE 105HD - FHT-EX 105 TTM Consumables for Machine Cutting Torch; Consumables for Standard Machine Cutting Torch 45-85 A

EX-TRAFIRE
®
105HD 19 FHT-EX
®
105TTM consumables for machine cutting torch
51
19 FHT-EX
®
105TTM consumables for machine
cutting torch
19.1 FHT-EX
®
105TTM consumables for standard machine
cutting torch 45–85 A
If a torch height controller is used, a retaining cap with IHS (initial height
sensing) must be used.
Table 23 FHT-EX
®
105TTM consumables for standard machine cutting
torch 45–85 A
Item Part number Description
A EX-5-404-051 Swirl ring 45–105 A
B EX-5-401-051 Electrode 45–105 A
C EX-5-410-051 Nozzle 45 A
D EX-5-410-053 Nozzle 55/65 A
E EX-5-410-030 Nozzle 75 A
F EX-5-410-055 Nozzle 85 A
G EX-5-415-050 Retaining cap 45–85 A
H EX-5-415-052 Retaining cap 45–85 A with IHS tab
I EX-5-422-051 Shield 45–85 A, machine
J EX-5-423-001 Deflector
Shielded
** U n s h i e l d e d