Revision history
You can find the latest version of the operating manual on our website:
www.thermacut.us
Revision R1/10_2022
Revision 2/02_2023
— 4.2 „Technical data“ – Maximum input power changed to 23.8 kVA
Revision 3/2023
— 6.3.1 “Connecting the single-phase machine” – Connection
procedure clarified
— 6.3.2 “Connecting the three-phase machine” – Connection procedure
clarified
— Chapter “CNC connection” converted into appendix.
Revision 4/07_2023
— 1.2 “Identification plate” – Location changed
— 4.2 “Technical data - tables 2, 3, 5, and 6” – Content adjusted; new
layout; torch dimensions added
— 6.3 “Connecting the power supply cable” – Chapters 6.3.1 and 6.3.2
(Connections of the power supply), and 6.4.1. (Connection to a
generator) changed
— 6.4.1 “Connection to a generator” – Output current changed
To Next Page
Loading...
