Operation
Instrument Controls Menu
Thermo Electron Corporation Model 42i Low Source Instruction Manual 3-43
Instrument ID of 42. For more information about the Instrument ID, see
Appendix B “C-Link Protocol Commands” or Appendix C “MODBUS
Protocol”.
• In the Main Menu, choose Instrument Controls > Communication
Settings > Instrument ID.
• Use and to increment or decrement the ID value.
•Press to save the new instrument ID.
Communication Protocol The Communication Protocol screen is used to change the instrument
communication protocol for serial communications. This does not affect
communications over Ethernet, because the protocols are processed
simultaneously on different ports.
In the Main Menu, choose Instrument Controls > Communication Settings
> Communication Protocol.
• Use and to scroll through a list of choices.
•Press to save the new protocol.
INSTRUMENT ID:
CURRENTLY: 42
SET TO: 50 ?
©ª
CHANGE VALUE
SAVE VALUE
RANGE AVG DIAGS ALARM
COMMUNICATION PROTOCOL:
CURRENTLY: CLINK
SET TO: STREAMING ?
©ª
CHANGE VALUE
SAVE VALUE
RANGE AVG DIAGS ALARM
To Next Page
Loading...
