THORLABS DCC1645C User Manual

95SDK (Software development Kit)
© 2010 Thorlabs
1)
Only with continuous image capture using is_CaptureVideo()
2)
The timeout is calculated from the exposure time setting, the image transfer time (depending on the
pixel clock) and the optional trigger delay (see is_SetTriggerDelay() ); it is at least 40 ms.
3)
The default value of the DCx camera API is 60 s. User-defined values can be set using the
is_SetTimeout() function.
Function List
is_CaptureVideo()
Captures a live video.
is_FreezeVideo()
Captures an image and writes it to the active image memory.
is_ForceTrigger()
Simulates a trigger signal in hardware trigger mode.
is_HasVideoStarted()
Returns whether the capture process has been started or not.
is_IsVideoFinish()
Returns whether the capture process has been terminated or
not.
is_SetSensorTestImage()
Enables test image output from sensor (all cameras).
is_StopLiveVideo()
Terminates the capturing process (live video or single frame).
289
287
124
148
145
191
198
283
290

THORLABS DCC1645C Specifications

General

Brand	THORLABS
Model	DCC1645C
Category	Security Camera
Language	English