© 2016 Thorlabs Scientific Imaging
4 Programming (SDK)
333
Enables horizontal binning with factor 2.
Enables horizontal binning with factor 3.
Enables horizontal binning with factor 4.
Enables horizontal binning with factor 5.
Enables horizontal binning with factor 6.
Enables horizontal binning with factor 8.
IS_BINNING_16X_HORIZONTAL
Enables horizontal binning with factor 16.
Returns the current setting.
IS_GET_BINNING_FACTOR_VERTICAL
Returns the vertical binning factor.
IS_GET_BINNING_FACTOR_HORIZONTAL
Returns the horizontal binning factor.
Returns the supported binning modes.
Indicates whether the camera uses color-proof
binning (IS_BINNING_COLOR) or not
(IS_BINNING_MONO)
Return values
When used with
IS_GET_BINNING
When used with
IS_GET_BINNING_FACTOR_VERTICAL
IS_GET_BINNING_FACTOR_HORIZONTAL
Current setting: Returns the current factor as
integer value (2, 3, 4, 5, 6, 8, 16)
When used with
IS_GET_BINNING_TYPE
Returns IS_BINNING_COLOR if the camera uses
color-proof binning; otherwise, IS_BINNING_MONO
is returned.
When used with
IS_GET_SUPPORTED_BINNING
Returns the supported binning modes linked by
logical ORs.
An internal structure has an incorrect size.
The image memory is already included in the
sequence and cannot be added again.
IS_CANT_COMMUNICATE_WITH_DRIVER
Communication with the driver failed because
no driver has been loaded.
An attempt to initialize or select the camera
failed (no camera connected or initialization
error).
A capturing operation is in progress and must
be terminated before you can start another one.
IS_DR_CANNOT_CREATE_SURFACE
The image surface or overlay surface could not
be created.
IS_DR_CANNOT_CREATE_TEXTURE
The texture could not be created.
IS_DR_CANNOT_CREATE_VERTEX_BUFFER
The vertex buffer could not be created.
IS_DR_DEVICE_OUT_OF_MEMORY
Not enough graphics memory available.
The DirectRenderer library could not be found.
The image memory has an inappropriate size to