THORLABS DCU22 Series Description And Sdk Manual

© 2016 Thorlabs Scientific Imaging334
DCx Camera Functional Description and SDK Manual
store the image in the desired format.
IS_INVALID_CAMERA_TYPE
The camera type defined in the .ini file does not
match the current camera model.
IS_INVALID_CAPTURE_MODE
The function can not be executed in the current
camera operating mode (free run, trigger or
standby).
IS_INVALID_CAMERA_HANDLE
Invalid camera handle
IS_INVALID_MEMORY_POINTER
Invalid pointer or invalid memory ID
IS_INVALID_MODE
Camera is in standby mode, function not allowed
IS_INVALID_PARAMETER
One of the submitted parameters is outside the
valid range or is not supported for this sensor or
is not available in this mode.
IS_INVALID_PIXEL_CLOCK
This setting is not available for the currently set
pixel clock frequency.
IS_IO_REQUEST_FAILED
An IO request from the uc480 driver failed.
Possibly the versions of the uc480.dll (API) and
the driver file (uc480_usb.sys) do not match.
IS_NO_ACTIVE_IMG_MEM
No active image memory available. You must
set the memory to active using the
is_SetImageMem() function or create a
sequence using the is_AddToSequence()
function.
IS_NO_SUCCESS
General error message
IS_NOT_CALIBRATED
The camera does not contain any calibration
data.
IS_NOT_SUPPORTED
The camera model used here does not support
this function or setting.
IS_NULL_POINTER
Invalid array
IS_OUT_OF_MEMORY
No memory could be allocated.
IS_SEQUENCE_BUF_ALREADY_LOCKED
The memory could not be locked. The pointer to
the buffer is invalid.
IS_SUCCESS
Function executed successfully
IS_TIMED_OUT
A timeout occurred. An image capturing process
could not be terminated within the allowable
period.
IS_TRIGGER_ACTIVATED
The function cannot be used because the
camera is waiting for a trigger signal.
Related functions
is_SetSubSampling()
is_AOI()
is_SetImagePos()
is_PixelClock()

THORLABS DCU22 Series Specifications

General

Brand	THORLABS
Model	DCU22 Series
Category	Security Camera
Language	English