5-8
5.5 Storage
Do not store this instrument in a location where it might be exposed to water
or chemicals.
Avoid excessive atmospheric pressure, high temparature, excessive
humidity, poor ventilation, direct sunlight, dust, salt or sulfer in the air.
Do not store this instrument near chemical substances or in a location where
gas may be generated.
Store this instrument in a location where there is no tilt, vibration,
shock(during transportation).
When shoring the AL-2000, the protective cap should
be placed on the clean biometry probe tip and should be
placed in the case provided.
If the instrument is not to be used for a prolonged pe-
riod, disconnect the power cord and place the dust
cover over the instrument. When using it again, make
sure if the instrument works without any problem.
Storage Condition
Atmospheric temparature range:
-20 to +60 degree Celucius (-4 to +140 degree Fahrenheit)
Relative humidity range: 10 to 95 %