Tomey AL-100 User Manual

3-3
c) Connecting the foot switch
Connector should be plugged into terminal with a proper
direction.
1) Plug the connector (1) for the foot switch to the terminal
(2) labeled FOOT SW on the back of the AL-100. Line
up the slot of the connector with the tab on the terminal.
2) To source the connector, turn the locking ring (3) until
you hear it click into place.
d) Inserting the probe holder
The holder should be installed onto the unit with a proper
direction.
Insert the protruding rectangular tabs (1) on the probe
holder into the holes (2) on the right ide of the instrument.
DO NOT insert the holder upside down.
Push inward on the center of the probe holder (3) and pull it
downward to lock it in place.

Tomey AL-100 Specifications

General

Brand	Tomey
Model	AL-100
Category	Measuring Instruments
Language	English