3-1
3 OPERATION PROCEDURES
3.1 Safety precautions
ALWAYS cleans the probe tip before taking a measurement on a human
eye.
NEVER use the probe if there is any visible damage to its tip. Such use may
cause an incorrect maeasurement and/or damage to the cornea.
This instrument is designed exclusively for ophthalmic use. DO NOT use
the instrument for any purpose other than ophthalmic diagnosis and
measurement.
DO NOT use any cables or memory cards other than those specified in this
manual. Such use may result in damage to the instrument.
The protection cap should be used for the probe and put
it on a probe holder when you do not use a probe.
To Next Page
Loading...
Need help?
General
