3-33
3.3.8 Caliper function
The value that is measured, and displayed by the caliper
function might be different from the result of a measure-
ment because of the rough estimate value.
Measurements by the caliper function are the reference
values and it is not reflected in the IOL calculation.
It is a function to operate the location of measurement of
the cornea, the front side of LENS, the rear side of LENS,
and the retina, and to measure the distance between each
organization.
The organization that measures the distance is different
depending on the measuring method.
(Refer to the table below. )
Contact
Immersion
Normal
Dense
Aphakic
Pseudo
Normal
Dense
Aphakic
Pseudo
Cornea
ޚ
ޚ
ޚ
ޚ
LENS front
ޚ
ޚ
ޚ
ޚ
ޚ
ޚ
LENS rear
ޚ
ٌ
ޚ
ٌ
Retina
ޚ
ޚ
ޚ
ޚ
ޚ
ޚ
ޚ
ޚ
ޚ
The caliper can move.
ٌ
The caliper can move if there is an echo.
The caliper movement function is not provided.
To Next Page
Loading...
Need help?
General
