Tomey AL-100 User Manual

3-70
3) Select the Receive key (3) in the screen of (Fig. 3) to
display the Data Receiving screen of (Fig. 4).
4)
When the personal computer is ready for sending data
to the Instrument, select the OK key (4) to start
receiving data by Instrument.
5) When finishing sending data from the computer,
received data are displayed in the screen of the
Instrument.
Then, press OK key (4) to go back to IOL or EDIT.
6) If the Cancel key (5) is selected, received data will be
disposed so that the screen will be returned to IOL
Calculation screen or the EDIT screen.
(Figure 3)
(Figure 4)
(Figure 5)

Tomey AL-100 Specifications

General

Brand	Tomey
Model	AL-100
Category	Measuring Instruments
Language	English