Tonghui TH2827 Series - Setup File for Single-Group Component (*.STA)

TH2827 Series Operation Manual Chapter 4 [SYSTEM] and [FILE MANAGE]
48
Press [FILE MANAGE] to enter into the file manage page, shown as below:
TH2827402
4.2.1 Setup file for single-group component (*.STA)
40 groups of different single groups of component set file (*.STA file) can be
saved in the instrument, but external storage U-disk can display/operate 500
groups of different single groups of component set file (note: U-disc is an optional
accessory).
Use FILE MANAGE function on the following File menus, the following data will
be saved or loaded in the form of file, which are called *.STA file.
 Control and setting parameter on <MEASURE SETUP> page
 FUNCA
 FREQ
 LEVEL
 RANGE
 SPEED
 DC BIAS
 BIAS SRC
 TRIGG
 ALC
 DELAY
 Rsou
 AVG
 Vm
 Cm
 ISO
 DEV A
 DEV B
 REF A