Tonghui TH2827 Series - Chapter 7 Command Reference; Subsystem Commands for TH2827; Display Subsystem Commands

TH2827 Series Operation Manual Chapter 7 Command Reference
80
Chapter 7 Command Reference
The signs in this manual are as follows:
NR1: integer, e.g.:123
NR2: fix-point number, e.g.: 12.3
NR3: floating-point number, e.g.: 12.3E+5
NL: carriage key, ASCII code: 10
ˆEND: EOI signal in IEEE-488
7.1 Subsystem commands for TH2827
●DISPlay
●FREQuency
●VOLTage
●CURRent
●AMPLitude
●Output RESister
●OUTPut
●BIAS
●FUNCtion
●LIST
●APERture
●TRIGger
●FETCh?
●CORRection
●COMParator
●Mass MEMory
7.1.1 DISPlay subsystem commands
DISPlay subsystem commands are mainly used to set the display page for the
instrument. The :DISPlay? Query returns the current page.
Command tree: