Tonghui TH2827 Series - Page 56

TH2827 Series Operation Manual Chapter 4 [SYSTEM] and [FILE MANAGE]
50
 LOAD
 SAVE
 DEL
 FIND

 COPY TO E:

3) In the file list, move the cursor to the file-saved position or input the file
number directly.
4) Press SAVE, the following soft keys will be displayed.
 Yes
 No
5) Press No to cancel the current save operation and return step 2.
6) Press Yes, and “☺：Input LCR file name：” will be displayed
7) Use numeric keys to input the current file name and press [ENTER]. Then
TH2827 will save the control and setting parameters as a file in this name.
C. Load the control and setting parameters from a file by the following
steps
1) Press FILE MANAGE, the file list and the following soft keys will be displayed.
 LOAD
 SAVE
 DEL
 FIND

 COPY TO E:

2) In the file list, move the cursor to the file-saved position or input the file
number directly.
3) Press LOAD, the following soft keys will be displayed.
 Yes
 No
4) Press No to cancel the current load operation and return step 1.
5) Press Yes to load the currently selected file. Then TH2827 will return the
current display page.
D. Copy a file to an U disk by the following steps
1) Assuming that it is necessary to copy internal files 2 to external U-disk.
2) Press FILE MANAGE, the file list and the following soft keys will be displayed.
 LOAD
 SAVE
 DEL
 FIND
