Topcon BM-7A - Buzzer Sound; Measurement Unit

3. Various Settings
57
3.10 Buzzer Sound
The setting for whether or not to set a buzzer sound is displayed.
Display Method
☞
「3.1.2 Data/Setting Item Display」
The procedure for setting the buzzer is as described below.
1 Press the [CHANGE] button.
2 Press the [ROTATION] button and select the setting contents.
Each time the button is pressed, the buzzer is turned ON/OFF.
3 After selection is finished, press the [ENTER] button.
3.11 Measurement Unit
The measurement unit currently being used is displayed.
Display Method
☞
「3.1.2 Data/Setting Item Display」
＊ ＳＥＴ ＵＮＩＴ ＊
ＵＮＩＴ ｃｄ／ｍ＾２
＊ ＳＥＴ ＢＵＺＺＥＲ ＊
ＢＵＺＺＥＲ ＯＦＦ