Appendix
91
Terminology
Correction Factor :
This means three factors, KX, KY and KZ to correct tristimulus values.
Area Correction Factor :
When an arbitrary area is specified on the xy chromaticity diagram and u'v' chromaticity diagram,
these factors are for correcting values that enter that area.
Correction Reference Sample :
This is a sample to determine a correction factors.
(Such as monitor TV valued in correction with tristimulus values through spectrometry.)
Standard sample :
This is a sample used as standard for color matching.
White Board :
This is a white board with good diffusion, which is made of barium sulfate, etc.
Local Mode :
This means a normal measuring status.
The instrument is operated by the panel switches, allowing no control from outside.
Remote Mode :
The instrument is controlled by an external personal computer via interface.
It can also be controlled by its panel switches.
Function Mode :
This is a mode to display and change the data stored in the memory of this instrument.
Direct Correction Function :
This is a function for performing correction between two Luminance Colorimeters that are directly
connected by a RS-232C cable.
To Next Page
Loading...
