3. Various Settings
59
3.14 Maintenance Recommended Display
The maintenance recommended display is displayed after buying the BM-7A or after one year has
elapsed since calibration conducted by Topcon factory.
Display Method
☞
「3.1.2 Data/Setting Item Display」
ON : A buzzer will sound and the display will not advance to the next screen until any
button is pressed.
OFF : The message is displayed but the buzzer does not sound and it is possible to
advance to the next screen.
The procedure for making changes is as described below.
1
Press the [CHANGE] button.
2
Press the [ROTATION] button and select the setting contents.
Each time the button is pressed, the setting will change between ON/OFF.
3
After selection is finished, press the [ENTER] button.
Ｍａｉｎｔｅｎａｎｃｅ Ｄｉｓｐｌａｙ
＊ＯＮ
To Next Page
Loading...
