Topcon BM-7A - CT Command; AM;SM Command

4. Communication With a PC
70
4.2.24 CT Command
The amount of elapsed time since the last calibration of the instrument can be read out by this
command.
PC Command BM-7A
ＣT + (Cr･Lf)
OK + (Cr･Lf)
Time [minutes] + (Cr･Lf)
END + (Cr･Lf)
4.2.25 AM/SM Command
The average measurement and single measurement can be selected by this command.
AM： Performs averaging measurement.
SM： Performs single measurement.
PC Command BM-7A
AM/SM + (Cr･Lf)
OK + (Cr･Lf)