Topcon BM-7A - FO Command; CGL Command; FGR Command

4. Communication With a PC
67
4.2.15 FO Command
The area correction can be deactivated by this command.
PC Command BM-7A
FO + (Cr･Lf)
OK + (Cr･Lf)
4.2.16 CGL Command
The chromaticity area data in the area correction function per group units can be cleared by this
command.
CGL [n] : Number of area correction factor groups to be cleared. 1 to 10
PC Command BM-7A
CGL1 + (Cr･Lf)
OK + (Cr･Lf)
4.2.17 FGR Command
The number of the area correction factor group currently being used can be read out by this
command.
PC Command BM-7A
FGR + (Cr･Lf)
OK + (Cr･Lf)
Group Number
END + (Cr･Lf)