Topcon BM-7A - Page 74

4. Communication With a PC
72
■ BM-7fast Mode
Output data are three kinds of data; measurement conditions, color coordinates/correlated color
temperature and tristimulus values.
-M0 Command-
T*R*XnYnZnUCFn＿
x=_＃.＃＃＃＃_y=_＃.＃＃＃＃_
X=_#.###E±##_Y=_#.###E±##_Z=_#.###E±##CR
-Ｍ1 Command -
T*R*XnYnZnUCFn＿
u’=_#.####_v’=_#.####_
X=_#.###E±##_Y=_#.###E±##_Z=_#.###E±##CR
-Ｍ2 Command -
T*R*XnYnZnUCFn＿
Tc=_#.####_duv=_#.###_
X=_#.###E±##_Y=_#.###E±##_Z=_#.###E±##CR
T* : Response speed TF:FAST TS:SLOW
R* : Measurement range RA:AUTO RM:MANUAL
Xn : X
2
measurement range used in actual measurement n = 1 to 5
Yn : Y
measurement range used in actual measurement n = 1 to 5
Zn : Z
measurement range used in actual measurement n = 1 to 5
UC : Measurement unit, cd/㎡
Fn : Measurement angle F1: ０.１° F2: ０.２° F3: １° F4: ２°
* A space is indicated by _.
* A numerical value is indicated by #.
* A carriage return is indicated by CR.