Configuring the Radio Modem
P/N 7010-0736
3-3
collecting static or kinematic observation data. See “Receiver
Setup” on page 4-1 for more information.
Configuring the Radio Modem
Modem-TPS is Topcon’s radio modem configuration utility for
modems embedded in Topcon receivers. Modem-TPS (version 2.2p2
or newer) provides the following functions:
• Connecting a computer to an integrated radio modem via a serial
port or Bluetooth wireless technology.
• Displaying information about the radio modem installed in the
receiver.
• Programming the radio modem’s settings.
See the following sections for details on configuring the receiver with
the following modem types using Modem TPS:
• Spread Spectrum
• Spread Spectrum with GSM
• Digital UHF
• Digital UHF with GSM
• Digital UHF with CDMA
Topcon’s configuration and surveying software, TopSURV or
Pocket-3D, also have the ability to configure Topcon receivers. Refer
to the TopSURV or Pocket-3D manuals for details.
Note that the UHF/SS radio and the GSM radio do
not work simultaneously. Only one radio can be
used at a time.
When finished configuring the radio modem,
always disconnect from Modem-TPS before exiting
to prevent conflicts with serial port management.
To Next Page
Loading...
Need help?
General
