Modem-TPS Problems
P/N 7010-0736
6-13
D The receiver’s Slot 2(C) is turned off.
1. Connect your receiver and a computer using an RS232
cable (see “Establishing an RS232 Cable Connection” on
page 2-22).
2. Click ConfigurationReceiverGeneral.
3. In the Turn on/off Slots area, enable the Slot 2(C) check
box.
Can see the icon for the receiver’s Bluetooth module on the
computer screen, but cannot connect to it
D Device security settings probably differ.
• Make sure your Bluetooth enabled devices use the same
security settings.
• See “Bluetooth Module Configuration” on page 2-23,
specifically Figure 2-22 on page 2-25 for details on
changing security settings.
D Bluetooth module settings may have changed.
1. If you changed settings for your Bluetooth module,
remove it from the list of discovered Bluetooth devices
using the Bluetooth manager program (supplied with the
device used to manage the receiver).
2. Repeat the search.
Modem-TPS Problems
The following is the most commonly encountered Modem-TPS
problem.
Modem-TPS cannot connect to the receiver
D The receiver is turned off.
Ensure the receiver has power and is turned on.
D If using a cable, the cable’s connectors are improperly attached.
To Next Page
Loading...
Need help?
General
