Troubleshooting
GR-3 Operator’s Manual
6-10
The receiver does not log data
D The receiver has no the SD card installed or the memory option
is disabled or expired.
• Check that the card is properly inserted. For details, see “To
install the SD card” on page 2-7.
• Check that the memory option is enabled. For details, see
“Checking the Receiver’s OAF” on page 5-10.
D The receiver’s memory card has no free space.
• Download and/or delete data files to free up space for new
files (see “Downloading Files to a Computer” on page 5-1
and “Deleting Files from the Receiver’s SD Card” on
page 5-8).
• Use the AFRM feature. See “Automatic File Rotation
Mode (AFRM) parameters” on page 3-39.
Bluetooth Problems
The following are some of the most commonly encountered error
messages and other problems.
BTCONF error message: Can’t find receiver
D The receiver is turned off.
Ensure the receiver has power and is turned on.
D If using a cable, the cable’s connectors are improperly attached.
• Check that the cable connector is attached to the correct
serial port.
• Unplug the cable, then securely and properly reconnect it to
the receiver.
D If using a cable, the cable is damaged.
• Use an undamaged cable.
• Contact your TPS dealer to purchase a new cable.
To Next Page
Loading...
Need help?
General
