Installing Topcon Software
P/N 7010-0736
2-5
Installing BTCONF
BTCONF is a configuration program for the Bluetooth wireless
technology module inside the receiver. BTCONF is available from the
TPS website (www.topconpositioning.com) or on the GPS+ CD.
Computer requirements for BTCONF are: Windows® 98 or newer
and an RS-232C port or Bluetooth wireless technology. Use
BTCONF version 1.3 or newer to correctly configure the receiver.
To install BTCONF:
1. Create a BTCONF folder on the hard drive, and place the
compressed BTCONF zip file (retrieved from either the website
or the GPS+ CD) in this folder.
2. Navigate to the BTCONF folder, and double-click the BTCONF
zip file.
3. Extract the btconf.exe to the BTCONF folder.
4. Create a shortcut on the computer’s desktop for quick access to
BTCONF (Figure 2-4).
Figure 2-4. Extract Program and Create Shortcut
To uninstall BTCONF, navigate to the location of the *.exe file. Select
the file, and press Delete.
Each time BTCONF runs and configures the Bluetooth module,
BTCONF saves the settings in a file (btconf.ini). BTCONF
To Next Page
Loading...
Need help?
General
