Topcon HiPer Ga User Manual

Receiver and File Maintenance
HiPer Ga/Gb Operator’s Manual
5-20
5. Click the Device tab, and set the Device Type as “Receiver’s
Power Board.” Click Get from Device for device information
(Figure 5-21).
Figure 5-21. Set Device Type
6. Click the Program tab, and set the Capture Method to “Soft
Break Capture” (recommended) (Figure 5-22).
Figure 5-22. Program Tab Settings
7. Browse for and select the Power board’s RAM file (Figure 5-22).
8. Click Load, and wait until 100% of the power board file loads
into the receiver.
NOTICE
If you selected an incorrect file, an error message
displays at the bottom of the dialog box. Select the
correct file.

Topcon HiPer Ga Specifications

General

Brand	Topcon
Model	HiPer Ga
Category	Receiver
Language	English