MINTER Configuration
P/N 7010-0816
3-19
4. Click Connect.
Figure 3-15. Connection Parameters – MINTER Settings
5. Click ConfigurationReceiver, and then the MINTER tab. Set
the following parameters, and click Apply (Figure 3-16). See the
following pages for descriptions of these parameters.
• Recording interval on page 3-20
• Elevation mask for log file on page 3-20
• File name prefix on page 3-20
• Always append to the file on page 3-20
• Files Creation mode on page 3-21
• Automatic File Rotation Mode (AFRM) on page 3-21
• FN key mode on page 3-22
• Initial data collection dynamic mode on page 3-22
• Data recording auto-start on page 3-23
To Next Page
Loading...
