Topcon Motorgrader - Page 116

Grading Applications
Motorgrader System Five Operator’s Manual
5-24
Once grade has been cut and verified at the centerline, mark the
centerline with spray paint to make it visible for the operator.
Figure 5-31.
Finished grade can be carried over the centerline by tracking the pass
on the opposite side.
Figure 5-32.
C
L
2.0%
SLOPE
2.0%
SLOPE
MARK CENTERLINE
WITH SPRAY CAN
SPRAY PAINT
CENTERLINE
AT 25' INTERVALS
WINDROW PUSHED
1 1/2' OR MORE
PAST CENTERLINE
VIEW F R O M B E H I ND G RAD E R
2.0%
SLOPE
C
L