Blade Slope Sensor
P/N 7010-0344
1-7
Blade Slope Sensor
The Blade Slope Sensor measures the slope of the cutting edge. It has
a precision electronic level sensor within it that functions like a
carpenter's level. It then relays that information to the Control Box.
The Blade Slope Sensor will measure slopes from +20% to -20%.
There is an option for a steep slope sensor that will measure up to +/-
100% slope.
The Blade Slope Sensor is sealed and once attached to the
motorgrader should not be removed.
Figure 1-6.
To Next Page
Loading...
