P/N 7010-0344
Appendix A
A-1
Safety Information
It is your responsibility to be completely familiar with the cautions
described in this System Five Manual. These messages advise against
the use of specific methods or procedures which can result in personal
injury, damage to the equipment, or unsafe operating conditions.
Remember, most accidents are caused by failure to observe basic
safety precautions.
General Precautions
1. Read and become familiar with the grader manufacturer’s
operations manual, including safety information before installing
or using your TOPCON System Five.
2. Use extreme caution on the jobsite. Working around heavy
construction equipment can be dangerous.
3. DO NOT attach System FiveD brackets or hose connections
while the grader is running.
4. DO NOT allow any System Five component to limit the visibility
of the operator.
5. Use Ty-wraps, supplied with System Five, to keep hoses and
wires secured and away from possible wear or pinch points.
6. Use eye protection when welding, cutting or grinding is being
done on the machine.
7. Protect yourself at all times, and wear protective clothing, when
working on or near hydraulic lines. Hydraulic lines can be under
extreme pressure, even when the machine is turned off.
To Next Page
Loading...
