Topcon Motorgrader - Smart Knobs and System Modes

Control Box
P/N 7010-0344
2-13
Once Gain adjustments have been complete, push "ENTER".
Figure 2-18.
Remote “Smart” Knobs
Figure 2-19.
• Raise and Lower
These buttons will make measured adjustments to the slope or
elevation setting. Each time one of the buttons is pressed, the
slope/elevation will change by one step. Theoutside button will
System
System
Five
Five
System
Five
A u t o A u t o
System
System
Five
Five
System
Five
ADJUST GAIN
E NT E R
2.0%
0.0
F
T
75 50
TURN THIS KNOB TO
ADJUST ELEVATION GAIN
TURN THIS KNOB TO
ADJUST CROSS SLOPE GAIN
LEFT RIGHT
Raise Rais
e
Auto Auto
Manual Manual
Lower Lower
Survey
Swap Set Point
Survey