EasyManua.ls Logo

Toro ProLine H600 - Operating the Hopper

Toro ProLine H600
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating the Hopper
Operating the Hopper Safety
When dumping, do not let anyone stand behind
the machine.
Ensure that there is enough clearance above
when raising the hopper; otherwise, you could
damage the machine.
Use extra caution when operating the machine on
wet surfaces, on slopes, at higher speeds, or with
a full load. Stopping time increases with a full load.
Keep all bystanders away . Before backing up, look
to the rear and ensure that no one is behind the
machine. Back up slowly .
Use extra caution and avoid moving the machine
with the hopper in the raised position.
Keep bystanders away from the machine when
lowering the hopper .
Raising the Hopper
1. Park the machine on a level surface.
2. Move the hopper lift lever rearward to raise the
hopper ( Figure 23 ).
g474746
Figure 23
32

Table of Contents