6
Installing the Front Lift Arms
Parts Required
1 Lift arm kit (optional kit—order separately)
Preparing to Install the Lift Arms
G402564
1. Insert a pivot rod into each lift arm and
align the mounting holes.
2. Secure the pivot rods to the lift arms with 2
bolts (5/16 x 7/8 inch).
3. Torque the bolts to 37 to 45 N∙m (27 to 33 ft-
lb).
G402566
4. At the front of the machine, remove the 2
flange bolts (1/2 x 2 inches) that secure the
pivot-shaft link
to the lift arm pivot shafts ,
and remove the link.
Note: Retain the pivot-shaft link and the
flange bolts.
Assembling the Lift Arms to the Machine
G402567
1. Assemble the lift arms onto the lift-arm-
pivot shafts
as shown.
2. Assemble the previously-removed pivot-shaft
link
to the lift-arm-pivot shafts with the 2
flange bolts (1/2 x 2 inches)
.
3. Torque the flange bolts (1/2 x 2 inches) to 95
N∙m (70 ft-lb).
3466-297A Page 3–6 Setup: Installing the Front Lift Arms
To Next Page
Loading...
