Toro Reelmaster 3100-D - Lifting the Back of the Machine (Using a Jack); Removing the Battery Cover; Opening the Hood

Lifting the Back of the Machine (Using a Jack)
G447817
1. Chock the tires.
2. Jack the back of the machine under the rear
wheel motor
.
3. Support the machine with jack stands rated for
the weight of the machine under the frame
.
Removing the Battery Cover
G448592
Remove the battery cover as shown.
Opening the Hood
G414711
1. Release the latches on both sides of the
hood.
Maintenance: Pre-Maintenance Procedures Page 6–6 3466-297 A