Key Switch
G444247
Off
Run/preheat the engine
Note: When the key is in the RUN/
P
REHEAT position, the glow plug
energizes and the indicator light
illuminates for approximately 7
seconds.
Start
Traction Pedals
G450112
Move forward—press the forward
traction pedal.
Move backward (or to assist in
stopping when moving forward)—press
the reverse traction pedal.
Allow the pedals to move or
move them to the Neutral
position to stop the machine.
Mow/Transport Slide
G444501
TRANSPORT—move the slide to this
position when transporting the machine.
Note: The cutting units do not lower
when the slide is in the T
RANSPORT
position.
MOW—move the slide to this
position to operate the cutting units.
Product Overview: Controls Page 4–2 3466-297 A
To Next Page
Loading...
